Chris Hunt Chris Hunt's Profile Page

Chris Hunt Chris Hunt

0 Course Enrolled • 0 Course Completed

Biography

Latest Braindumps JN0-683 Ebook & JN0-683 Free Pdf Guide

P.S. Free & New JN0-683 dumps are available on Google Drive shared by ITCertMagic: https://drive.google.com/open?id=1fhTxf6uQYu4rAd5-24f-SypnUMtd-lPI

Are you planning to appear in the Data Center, Professional (JNCIP-DC) (JN0-683) certification test and need to know where to get updated practice questions? Then you are at the right place because Data Center, Professional (JNCIP-DC) (JN0-683) has made the learning material for the applicants to prepare successfully for the certfication exam in a short time.

Perhaps you haven't heard of our company's brand yet, although we are becoming a leader of JN0-683 exam questions in the industry. But it doesn't matter. It's never too late to know it from now on. Our JN0-683 study guide may not be as famous as other brands for the time being, but we can assure you that we won't lose out on quality. We have free demos of our JN0-683 Practice Engine that you can download before purchase, and you will be surprised to find its good quality.

>> Latest Braindumps JN0-683 Ebook <<

Top Latest Braindumps JN0-683 Ebook Help You Clear Your Juniper JN0-683: Data Center, Professional (JNCIP-DC) Exam Certainly

We have prepared our Juniper JN0-683 Training Materials for you. They are professional practice material under warranty. Accompanied with acceptable prices for your reference, all our materials with three versions are compiled by professional experts in this area more than ten years long.

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q12-Q17):

NEW QUESTION # 12
Exhibit.

Referring to the exhibit, the spinel device has an underlay BGP group that is configured to peer with its neighbors' directly connected interfaces. Which two statements are true in this scenario? (Choose two.)

A. The multihop statement is not required to establish the underlay BGP sessions.
B. The multihop statement is required to establish the underlay BGP sessions.
C. Load balancing for the underlay is not configured correctly.
D. Load balancing for the underlay is configured correctly.

Answer: A,D

Explanation:
* Understanding BGP Configuration in the Exhibit:
* The exhibit shows a BGP configuration on spine1 with a group named underlay, configured to peer with directly connected interfaces of other devices in the network.
* Multipath multiple-as:This statement allows the router to install multiple paths in the routing table for routes learned from different ASes, facilitating load balancing.
* Key Statements:
* A. The multihop statement is not required to establish the underlay BGP sessions:In this case, the BGP peers are directly connected (as indicated by their neighbor IP addresses), so the multihop statement is unnecessary. Multihop is typically used when BGP peers are not directly connected and packets need to traverse multiple hops.
* D. Load balancing for the underlay is configured correctly:The multipath { multiple-as; } statement in the configuration enables load balancing across multiple paths from different autonomous systems, which is appropriate for underlay networks in data center fabrics.
* Incorrect Statements:
* C. The multihop statement is required to establish the underlay BGP sessions:This is incorrect because the peers are directly connected, making the multihop statement unnecessary.
* B. Load balancing for the underlay is not configured correctly:This is incorrect because the configuration includes the necessary multipath settings for load balancing.
Data Center References:
* BGP configurations in EVPN-VXLAN underlay networks are crucial for ensuring redundancy, load balancing, and efficient route propagation across the data center fabric.

NEW QUESTION # 13
You are deploying an EVPN-VXLAN overlay. You must ensure that Layer 3 routing happens on the spine devices. In this scenario, which deployment architecture should you use?

A. distributed symmetric routing
B. ERB
C. CRB
D. bridged overlay

Answer: C

Explanation:
* Understanding EVPN-VXLAN Architectures:
* EVPN-VXLAN overlays allow for scalable Layer 2 and Layer 3 services in modern data centers.
* CRB (Centralized Routing and Bridging):In this architecture, the Layer 3 routing is centralized on spine devices, while the leaf devices focus on Layer 2 switching and VXLAN tunneling. This setup is optimal when the goal is to centralize routing for ease of management and to avoid complex routing at the leaf level.
* ERB (Edge Routing and Bridging):This architecture places routing functions on the leaf devices, making it a distributed model where each leaf handles routing for its connected hosts.
* Architecture Choice for Spine Routing:
* Given the requirement to ensure Layer 3 routing happens on the spine devices, theCRB (Centralized Routing and Bridging)architecture is the correct choice. This configuration offloads routing tasks to the spine, centralizing control and potentially simplifying the overall design.
* Explanation:
* With CRB, the spine devices perform all routing between VXLAN segments. Leaf switches handle local switching and VXLAN encapsulation, but routing decisions are centralized at the spine level.
* This model is particularly advantageous in scenarios where centralized management and routing control are desired, reducing the complexity and configuration burden on the leaf switches.
Data Center References:
* The CRB architecture is commonly used in data centers where centralized control and simplified management are key design considerations. It allows the spines to act as the primary routing engines, ensuring that routing is handled in a consistent and scalable manner across the fabric.

NEW QUESTION # 14
You want to convert an MX Series router from a VXLAN Layer 2 gateway to a VXLAN Layer 3 gateway for VNI 100. You have already configured an IRB interface. In this scenario, which command would you use to accomplish this task?

A. set bridge-domains VLAN-100 routing-interface irb.100
B. set vlans VLAN-100 13-interface irb.100
C. set protocols isis interface irb.100 passive
D. set protocols ospf area 0.0.0.0 interface irb.100 passive

Answer: A

Explanation:
* Scenario Overview:
* Converting an MX Series router from a VXLAN Layer 2 gateway to a VXLAN Layer 3 gateway involves transitioning the router's functionality from simply bridging traffic within a VXLAN segment to routing traffic between different segments.
* Key Configuration Requirement:
* IRB (Integrated Routing and Bridging) Interface:An IRB interface allows for both Layer 2 switching and Layer 3 routing. To enable routing for a specific VNI (VXLAN Network Identifier), the IRB interface must be associated with the routing function in the corresponding bridge domain.
* Correct Command:
* C. set bridge-domains VLAN-100 routing-interface irb.100:This command correctly binds the IRB interface to the bridge domain, enabling Layer 3 routing functionality within the VXLAN for VNI 100. This effectively transitions the device from operating solely as a Layer 2 gateway to a Layer 3 gateway.
Data Center References:
* This configuration step is essential when converting a Layer 2 VXLAN gateway to a Layer 3 gateway, enabling the MX Series router to route between VXLAN segments.

NEW QUESTION # 15
You want to provide a OCI that keeps each data center routing domain isolated, while also supporting translation of VNIs. Which DCI scheme allows these features?

A. VXLAN stitching
B. MPLS DCI label exchange
C. over the top (OTT) with proxy gateways
D. over the top (OTT) with VNI translation enabled

Answer: A

Explanation:
* Understanding DCI (Data Center Interconnect) Schemes:
* DCI schemes are used to connect multiple data centers, enabling seamless communication and resource sharing between them. The choice of DCI depends on the specific requirements, such as isolation, VNI translation, or routing domain separation.
* VXLAN Stitching:
* VXLAN stitching involves connecting multiple VXLAN segments, allowing VNIs (VXLAN Network Identifiers) from different segments to communicate with each other while maintaining separate routing domains.
* This approach is particularly effective for keeping routing domains isolated while supporting VNI translation, making it ideal for scenarios where you need to connect different data centers or networks without merging their control planes.
* Other Options:
* A. MPLS DCI label exchange:This option typically focuses on MPLS-based interconnections and does not inherently support VNI translation or isolation in the context of VXLAN.
* B. Over the top (OTT) with VNI translation enabled:This could support VNI translation but does not inherently ensure routing domain isolation.
* D. Over the top (OTT) with proxy gateways:This typically involves using external gateways for traffic routing and may not directly support VNI translation or isolation in the same way as VXLAN stitching.
Data Center References:
* VXLAN stitching is a powerful method in multi-data center environments, allowing for flexibility in connecting various VXLAN segments while preserving network isolation and supporting complex interconnect requirements.

NEW QUESTION # 16
Exhibit.

You are troubleshooting an IP fabric (or your data center. You notice that your traffic is not being load balanced to your spine devices from your leaf devices. Referring to the configuration shown in the exhibit, what must be configured to solve this issue?

A. The load-balance policy must have a from statement that matches on protocol bgp.
B. The multipastmultiple -as configuration must be configured for each peer in the BGP spine group.
C. The load-balance policy must be applied as an export policy to your BGP
D. The load-balance policy must be applied to the forwarding table under the routing-options hierarchy.

Answer: B

Explanation:
* IP Fabric Load Balancing:
* In the provided configuration, traffic is not being load-balanced to the spine devices. The issue likely relates to how BGP routes are being selected and whether Equal-Cost Multi-Path (ECMP) is functioning correctly.
* Multipath Multiple-AS:
* Option B:The multipath multiple-as configuration is essential when using BGP in an IP fabric where devices belong to different Autonomous Systems (AS). This setting allows BGP to consider multiple paths (even across different AS numbers) as equal cost, enabling ECMP and proper load balancing across spine devices.
Conclusion:
* Option B:Correct-The multipath multiple-as configuration is necessary for achieving ECMP and effective load balancing in a multi-AS BGP environment.

NEW QUESTION # 17
......

Our JN0-683 exam braindumps offer you a wide and full coverage of the keypoints on the career-oriented certification and help you pass the exam without facing any difficulty. And you will find that the subject is well compiled to the content of the JN0-683 training guide in our three different versions. They are the PDF, Software and APP online. The content of these versions is the same, but the displays of our JN0-683 learning questions are all different. You can choose the favorate one.

JN0-683 Free Pdf Guide: https://www.itcertmagic.com/Juniper/real-JN0-683-exam-prep-dumps.html

For candidates who are going to buy the JN0-683 training materials online, they have the concern of the safety of the website, you can stand out in your work and impressed others with professional background certified by JN0-683exam and feel self-fulfillment, get sense of satisfaction in personal perspective, and have stand a better chance of getting better working condition with the JN0-683 certification, Juniper Latest Braindumps JN0-683 Ebook Review Your Questions and Answers.

It will ensure the safety of your money, Strategic and Tactical Roles of Purchasing, For candidates who are going to buy the JN0-683 training materials online, they have the concern of the safety of the website.

Realistic Latest Braindumps JN0-683 Ebook - 100% Pass Juniper Data Center, Professional (JNCIP-DC) Free Pdf Guide

you can stand out in your work and impressed others with professional background certified by JN0-683exam and feel self-fulfillment, get sense of satisfaction in personal perspective, and have stand a better chance of getting better working condition with the JN0-683 certification.

Review Your Questions and Answers, With our JN0-683 VCE dumps materials, you are definitely going to achieve something great in an easier and more enjoyable way.

Our hottest products are the reliable JN0-683 VCE torrents which are the highest pass-rate products in our whole products line.

P.S. Free 2025 Juniper JN0-683 dumps are available on Google Drive shared by ITCertMagic: https://drive.google.com/open?id=1fhTxf6uQYu4rAd5-24f-SypnUMtd-lPI

Chris Hunt Chris Hunt

Biography

Address

Quick links

Resourses

Support